Waterproofing Membranes

Royston Membranes are reinforced rubberized bitumen based membranes which provide excellent tensile strength and puncture resistance. Royston? Membranes provide superior support and strength in the most demanding conditions with the added benefits of fast installation and lower traffic control costs. Royston? Membranes are made with state-of-the-art materials which increases the life expectancy and protects against structural damage caused by moisture permeation.

What size are the rolls?

The standard size is 48 inches x 50 feet. Custom sizes are available.

Need more info?

Need a sample?

Need Data Sheets?

Connect with Bridge & Highway ? |

Is a primer required?

Yes, unless the asphalt wearing surface is less than 12 months old, Chase manufactures a low?V.O.C. primer, a sprayable primer, and a cold temperature primer.

Need more info?

Need a sample?

Need Data Sheets?

Connect with Bridge & Highway ? |

Can Royston Membranes be applied to vertical surfaces?

Yes, The Royston 104 AHT can be applied to vertical surfaces. Other Royston Membranes may be applied to vertical surfaces. Please check with the Chase technical department for specific?recommendations.

Need more info?

Need a sample?

Need Data Sheets?

Connect with Bridge & Highway ? |

Does an asphalt overlay have to be applied?

Yes, in order to properly activate the bitumen adhesive primer, an asphalt overlay has to be?installed. The minimum requirements for the asphalt overlay are a 1-1/2inch lift thickness?and a minimum asphalt temperature of 290¡ãF at the screed.

Need more info?

Need a sample?

Need Data Sheets?

Connect with Bridge & Highway ? |

Is there an Installation Guide?

Chase has a Bridge Membrane Installation Guide. Please here to get the “Installation Guide”.

Need more info?

Need a sample?

Need Data Sheets?

Connect with Bridge & Highway ? |

Should there be an overlap of the membranes?

Yes, an overlap is required along the longitudinal joint. There is a 3-inch leading edge that promotes compound to compound contact.

Need more info?

Need a sample?

Need Data Sheets?

Connect with Bridge & Highway ? |

How are the transverse joints waterproofed?

Chase manufactures 104 CM Mastic that is applied on the exterior of the transverse joints. The104 CM Mastic will both seal and waterproofing the joint.

Need more info?

Need a sample?

Need Data Sheets?

Connect with Bridge & Highway ? |

Do you have some project examples?

View some Royston Membranes project cases.

You can also read our blogs on this topic:

  • ?

 

Need more info?

Need a sample?

Need Data Sheets?

Connect with Bridge & Highway ? |

Royston? Competition
Requires only a 1-1/2¡± lift thickness Up to a 2¡± lift thickness required
Tack coat is not required Tack coat recommended
Low-temperature application, down to 25¡ãF. Typically, 40¡ãF and rising
  • 3¡± Leading edge creates an adhesive to adhesive water-tight seam
  • Factory-made sheet ensures uniform, consistent thickness
  • Flexible material allows for movement due to thermal expansion and contraction
  • Fiberglass reinforcement provides increased tensile strength and puncture resistance

How to Waterproof a Bridge Deck Using Royston? Membranes

How to Install Royston? Membranes

How to Install Royston? Edge Sealer

Shingle style installation process for sheet membranes

Shingle Style Installation Process For Sheet Membranes
Waterproofing membrane curb detail

Royston Waterproofing membrane curb detail


Royston Waterproofing Membrane Drain Detail

Royston Waterproofing Membrane Drain Detail


 

General Purpose Membrane

Royston? 10A Waterproofing Membrane ?Bridge deck Membranes.png

  • Thickness of 60 ¡À 5 mils
  • High strength fiberglass inner core sandwiched between two layers of polymer modified bitumen
  • Unique 3- inch leading edge guarantees a positive compound-to-compound seal at the overlap.
  • Primer used to provide superior bonding to the substrate

Learn more

 

General Purpose Membrane

Royston? 10A-65 Waterproofing MembraneModified attachments to roll out membrane.png

  • Thickness of 70 ¡À 5 mils
  • High strength fiberglass inner core sandwiched between two layers of polymer modified bitumen
  • Unique 3- inch leading edge guarantees a positive compound-to-compound seal at the overlap.
  • Primer used to provide superior bonding to the substrate

Learn more

 

Bridge Deck / Roadway Membranes

Royston? 10A Easy Pave Bridge Deck MembraneRollout of first sheet.png

  • Thickness of 60 ¡À 5 mils
  • High strength fiberglass inner core sandwiched between two layers of polymer modified bitumen
  • Spun polyester surface layer provides protection against construction traffic
  • Unique 3- inch leading edge guarantees a positive compound-to-compound seal at the overlap

Learn more

Bridge Deck / Roadway Membranes

Royston? 10A-65 Easy Pave Bridge Deck Membrane

  • Thickness of 70 ¡À 5 mils
  • High strength fiberglass inner core sandwiched between two layers of polymer modified bitumen
  • Spun polyester surface layer provides protection against construction traffic
  • Unique 3- inch leading edge guarantees a positive compound-to-compound seal at the overlap

|

Bridge Deck / Roadway Membranes

Royston? 10AN Easy Pave Bridge Deck Membrane
Waterproofing Membranes

  • Thickness of 60 ¡À 5 mils
  • Impregnated NON-woven fiberglass inner core sandwiched between two layers of a polymer modified bitumen
  • Spun polyester surface layer provides protection against construction traffic
  • Unique 3- inch leading edge guarantees a positive compound-to-compound seal at the overlap

|

Architectural Membranes

Royston? 104AHT Architectural Membrane ?Waterproofing Membranes2

  • Thickness of 60 ¡À 5 mils
  • High strength fiberglass inner core sandwiched between two layers of polymer modified bitumen
  • Used as an architectural waterproofing membrane in commercial and residential below grade applications

|

Architectural Membranes

Royston? 108ARN Architectural Membrane ?

  • Thickness of 70 ¡À 5 mils
  • Impregnated NON-woven fiberglass inner core sandwiched between two layers of a polymer modified bitumen
  • Woven polypropylene surface layer is bonded to the top functioning as a protective barrier during backfill operations in vertical applications
  • Specifically designed for use in architectural applications and is not to be used in roadway applications

|

Primer-Membranes

Royston? Roybond 713AWaterproofing Membranes Royston 713 A

  • Standard primer used with Royston? Waterproofing Membranes.
  • Solvent-based, fast drying, single component, rubber resin primer.
  • Adheres firmly to properly prepared concrete, wood, aged asphalt, metal or other common construction materials.
  • Used when ambient and substrate temperatures are 45¡ãF and rising.

|

Primer-Membranes

Royston? Roybond 713BRoybond 713-b

  • Low VOC version of the Roybond 713A primer.
  • Solvent-based, fast drying, single component, rubber resin primer.
  • Adheres firmly to properly prepared concrete, wood, aged asphalt, metal or other common construction materials.
  • Used when ambient and substrate temperatures are 45¡ãF and rising.

|

Primer-Membranes

Royston? Roybond 740Roybond 740

  • Used in low temperature installations of Royston? Waterproofing Membranes.
  • Used when ambient and substrate temperatures are between 25¡ã – 45¡ãF and rising
  • Solvent-based, fast drying, single component, rubber resin primer.
  • Adheres firmly to properly prepared concrete, wood, aged asphalt, metal or other common construction materials.

|

Primer-Membranes

Royston? Roybond 750

  • Sprayable version of 713A primer.
  • Applied using airless spray equipment when ambient and substrate temperatures are 45¡ãF and rising.
  • Solvent-based, fast drying, single component, rubber resin primer.
  • Adheres firmly to properly prepared concrete, wood, aged asphalt, metal or other common construction materials.

|

Joint Sealant-Membrane

Royston? Flex Flo Adhesive Sealant (FFAS)

  • Used to adhere and seal the Royston? line of waterproofing membranes to concrete, asphalt, steel or wood substrates along perimeter locations, curbs, and penetrations
  • A rubberized elastomeric urethane accommodating a wide range of expansion, contraction, and shear stresses caused by vibration and thermal movement
  • Used to adhere and seal the Royston? line of waterproofing membranes to concrete, asphalt, steel or wood substrates along perimeter locations, curbs, and penetrations
  • Used in both vertical and horizontal Royston? membrane applications on any structure
  • Applied both underneath as well as on top of the membrane, acting as an adhesive as well as a sealant to prevent any water intrusion into the underlying substrate
  • Zero V.O.C., two component adhesive sealant which cures over a broad temperature range to a tough adherent rubber

|

Joint Sealant-Membrane

Royston? 104 Caulkable Mastic (104CM) Royston 104CM (2)

  • Used as a secondary sealant along the seams of an installed membrane system
  • A heavy-bodied, rubberized asphalt, single component sealant to be used with Royston? waterproofing membrane installations
  • Applied as a thin bead of sealant on the surface of Royston? Membranes
  • Creates an impenetrable barrier that prevents the intrusion of moisture at seams, protrusions and termination points
  • Will not dry out, crack or generally deteriorate

|

New Product

Royston? 10A 65P Waterproofing Membrane ?Bridge deck Membranes.png

  • Fast Installation
  • Lower Traffic Control Costs
  • Thickness of 60 ¡À 5 mils
  • Simplifies Project Scheduling
  • ?Specially formulated to meet PennDOT¡¯s elongation requirements

Learn more

null